Tips For Applying PVC Self Adhesive Vinyl

PVC self adhesive vinyl is a popular and affordable way to decorate your home or office. It also comes in a wide range of styles. Some are even eco-friendly. Some are permanent and others have a removable adhesive. Some premium wrapping films have specialist adhesives that allow you to reposition the vinyl before adding pressure to stick into place.

Easy to apply

The vinyl itself is very easy to apply, but the application of it to a surface can be difficult if the process isn’t done correctly. It’s important to be able to handle the material without stressing it, as this will cause wrinkles and bubbles in the finished product. If you’re having trouble with this, try a few tips that can help you make your application process run more smoothly.

For example, if you are applying your vinyl to a metal substrate like a wheelie bin or other metallic surface, be sure to prepare the surface by spraying it with water and then wiping it with a clean lint-free cloth that has been dampened with alcohol. Avoid wipes that contain emulsifiers, as they can migrate to the face-film of your vinyl and cause it to fail.

When you’re ready to apply the vinyl, make sure to use a good quality squeegee and a smooth, even motion to get a nice, flat result. This will eliminate bubbles and give you a beautiful finished product.

Depending on the surface, you may need to heat it up with a heat gun to activate the adhesive. Be sure to use a thermometer to verify that the panel is being heated evenly and to the right temperature. Once the panel is in place, you can trim away the excess vinyl wrap with a utility knife and then finish up by squeegeeing it to set and seal the edge.

Easy to remove

A lot of modern adhesives that are used on peel and stick vinyl floor coverings are quite strong and powerful. This is not necessarily a bad thing but it can make them more difficult to remove. To avoid this, make sure to prep the surface extremely well before applying. Also, use rubbing alcohol on your hands before trying to remove the product. This will help to remove any oils that may be on your hand.

You can use a spatula or cutter knife to loosen up the adhesive and start pulling it up. Be careful and slow when doing this so you Cutting Vinyl Rolls don’t stretch or rip the vinyl. Once you have the product off, clean the area thoroughly to ensure no residue is left behind. It’s also a good idea to wear knee pads and gloves while doing this, as it can be very messy.

Removable vinyl is ideal for kitchen labels and other temporary projects that require a flexible material. It comes in a variety of colors and finishes, including matte, glitter, and patterned options. You can even get one that changes Cutting Vinyl Rolls color based on the time of day! You can find these types of vinyl at any home improvement store. Just be sure to test it out on a small sample piece of your kitchen surface first before committing to a large purchase.

Weather and water resistant

Whether you need a permanent, semi-permanent or removable self adhesive vinyl film for your project we can supply you with the right solution. Our PVC free self-adhesive vinyls range from the short term Mactac 2 year to the 3M Envision Vehicle Wrap vinyls and everything in between. All of our products are fully compatible with all wide-format printers and suitable for UV-C, Latex and Solvent inks.

The production of PVC uses a lot of energy and produces CO2 gas emissions as well as taking centuries to decompose. It is also very hard to recycle and can contain toxins such as Chlorine. It is therefore better to choose a vinyl that doesn’t use PVC as it is far more eco-friendly.

Calendared PVC can be divided into Polymeric and Monomeric films based on the plasticisers used to make it flexible. Over time the plasticisers migrate out of the media causing it to shrink and become brittle and eventually crack. Monomeric films will experience this faster than polymeric products.

SINOVINYL wood grain self adhesive vinyl is made by environmentally friendly PVC material and does not contain formaldehyde, and the surface has many kinds of patterns, it can be used to renew furniture or decorate your office and home. It is oil proof and dust proof, and can be used for daily usage.

Long lasting

The material that self adhesive vinyl is made from is PVC which is a hard and brittle plastic. To make it flexible, plasticisers are added to the raw material, these can be long-chain poly or short-chain mono. These will migrate out of the vinyl over time, this is hastened by UV and weathering resulting in it becoming more brittle or cracking. Polymeric films will experience less plasticiser migration than monomeric and so are more suitable for long term external use.

When selecting your printed vinyl for a project it is important to choose the right product, not all films are created equal and technical features such as adhesives and liners can affect the price and ease of use. Bargain vinyl’s often use cheap adhesives and liners to achieve their low price point which can result in poor adhesion and longevity.

Polar premium self-adhesive vinyl is a high quality PVC free film that is ideal for all indoor and many outdoor display applications, it can be used on flat or slightly curved surfaces. The vinyl can be used to produce signs, point-of-sale displays, window graphics, vehicle wrapping and floor graphics. It has a permanent or removable adhesive and is suitable for most wide-format digital print technologies including UV, Latex and Solvent. The vinyl also has air release channels built into the silicon coated paper liner allowing for a bubble-free installation.