Waterproof Outdoor Solar Lights

Solar lights have three main components: a solar photovoltaic panel, an LED lamp or bulbs, and a battery. These are fitted into a weatherproof casing.

They’re kinder to wildlife than mains-powered lights, emitting a dimmer glow that’s less likely to disturb nocturnal creatures.

They come with spiked stakes for easy installation along waterproof outdoor solar lights paths or in flower beds. They also have eight different light settings.

Waterproofing

When you are buying solar lights for your garden, look for those that have a waterproof rating. This is especially important if you live in an area that experiences heavy rain or storms. Solar lights with a waterproof rating will be able to withstand bad weather conditions like rain, wind and snow.

The waterproofing of a solar light is usually indicated by an IP (Ingress Protection) rating, which consists of two numbers. The first number refers to the level of protection that an electronic device has against solid objects, such as dust, whilst the second number indicates the level of protection against liquids such as water.

A solar light with an IP rating of 6 or higher will be able to withstand splashes from any direction as well as being fully submerged in water. For this reason, it is the most suitable option for outdoor use.

In addition to looking for an IP rating of 6 or above, you should also take other precautions to protect your solar lights from water damage. These include putting your solar lights on elevated surfaces to avoid water accumulation, turning them off when not in use and using sealants to fill any gaps around the casing. You should also store your solar lights indoors during the winter if you live in a climate with harsh weather. This will prevent them from being damaged by snowblowers and shovels.

Maintenance

A little bit of regular maintenance is all that’s needed to ensure that your waterproof outdoor solar lights continue working well. Wiping each fitting down with a damp cloth twice per week, or more often if you live in a dusty area, is enough to keep them looking good and functioning well.

The most common issue with solar lights is a build-up of grime that interferes with the solar panel’s ability to charge the battery during daylight hours. This will result in less brightness and shorter operation of the fixture at night, but it’s relatively easy to clean. Simply wipe the surface with a cloth dampened in mild soap.

It’s also important to check the battery regularly for signs of corrosion. This can usually be spotted by white powder on the surface of the battery or within the housing. If you notice any, take the battery out and clean it with a soft brush.

It’s a good idea to wipe the entire fixture down every once in a while as well, especially if you have pets that might scratch it. This will help to prevent the dirt and grime from becoming embedded into the plastic. It’s a good idea to use a silicone sealant in any joints that are exposed to water, like between the charge panel and the main casing or light socket.

Storage

A solar light is powered by a rechargeable battery that stores electrical Waterproof Outdoor Solar Light Manufacturer energy. The energy is used to power an LED or traditional incandescent bulb, and the lights can be placed on walkways, paths, driveways, flower beds, and other outdoor spaces.

The best way to protect your waterproof solar lights is to keep them clean and stored properly when not in use. If you live in an area that receives a lot of rain or snowfall, you should store your lights indoors over the winter to protect them from damage.

You can do this by using a box or some other type of container that is large enough to fit your lights. This will help prevent them from getting damaged when you move them to and from storage. The box should also be big enough to allow you to store your lights in a cool, dry place.

If you are unable to find a container that is big enough to fit your solar lights, you can use a sealant such as silicone caulk. This can be applied in a very thin bead around the edges of your solar lights, and it will help to protect them from water ingress. Be sure to use a caulk that dries transparent, so it will not affect the look of your lights.

Replacement

Many people have dozens of solar lights that they put out each year to brighten up their patios, garden beds, and pool areas. While they are a great addition to any outdoor area, it is important that they are properly stored during winter to avoid any damage. Taking them inside will protect the solar panel, battery compartment, and wiring connections from moisture, snow, and ice that could lead to corrosion and short circuiting.

Most solar lights can be left out throughout the winter as long as they are rated for it, but you should remove them from any ground installations that may get damaged by snow shovels and snowblowers. The best way to ensure your solar lights last all winter is to store them in a storage unit that will keep them clean and dry.

Using a plastic soda bottle that you can easily clean and reseal will allow you to store your solar lights safely without putting any excess stress on them. You can also purchase airtight jars like those used in the kitchen to hold dried foods or pasta for a small cost.

Silicone caulk is another option for sealing your solar lights. If you are able to find a type that dries clear, it will blend in with your solar lights for a less noticeable effect. Simply use a caulking gun to apply the sealant around your lights and let it dry completely before you can return them to their outdoor location.